CalAmp GUARDIAN User Manual download pdf (Page 55)

Remote ID List This button allows the user to gather Offline Diagnostics from all the IDs in the list of Remote IDs

(including the local unit).

Progress

Displays the progress of obtaining Remote Diagnostics.

Tx Tone

The Tx Tone button will send a remote or local command to cause the Guardian to transmit a tone. This can be used to

create network traffic so that offline diagnostics of remotes can be monitored.

Get Diags/Stats

The Get Diags/Stats button allows the user to send the command for Offline Diagnostics. The command is sent to the

unit connected to the computer if the Local ID button is selected. The command is sent to the selected Remote ID if the

Remote ID and Selected Remote ID buttons are selected. The command is sent to the list of Remote IDs if the Remote

ID and Remote ID List buttons are selected.

Stop

Allows the user to stop any commands for Offline Diagnostics from being sent.

Clear Diags

Clears the unit diagnostics.

Clear Stats

Clears the unit network statistics.

Save

Allows the user to save the current Offline Diagnostics to a file.

Closes the Offline Diagnostics window.

5.16 ONLINE DIAGNOSTICS

The Online Diagnostics window is accessed from the Utilities menu.

Online Diagnostics are transmitted by each unit in a network before the user’s data is transmitted. All units must be

programmed with the Online Diagnostics parameter to receive Diagnostics from a system. The unit that the computer

is interfaced with will output Online Diagnostics as they are received. This unit must have the Output Online Diagnostic

Data to the Setup Port parameter programmed (found on the Setup Modem/Radio Parameters window).

Note: Using Online Diagnostics does not require suspension of network operation.

Online Diagnostics are subject to alarm and filter conditions defined in the Diagnostic IDs, Alarms and Filters window

(see the following figure). When Online Diagnostics are received and a diagnostic field falls outside the alarm limits, a

“<”character will designate a value less than the low alarm and a “>” character will designate a value greater than the

high alarm. If Online Diagnostics are received and a diagnostic field falls outside the filter limits, the diagnostic

information will be considered invalid and will not be displayed.

Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3 | Page 47

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 99 100

No comments

CalAmp GUARDIAN User Manual Page 55